Wire tutorial pendant Dragon Silversmithing tutorial silver soldering Wire weaving Jewelry tutorial PDF wire wrapping cabochon setting

This is a very complicated tutorial, about the making of a silver pendant Dragon. Very detailed. Much attention to silver soldering and setting the stone. I'll show you how to make a pretty silver bezel for the cabochon and connect to all construction. Especially important - I will tell about the sequence of soldering construction from many parts.

Difficulty level - high. For advanced users.

Working time - 4 hours.
Tools and Supplies:
Chain nose pliers
Round nose pliers
Wire cutters
Hammer
Miniature Horn Anvil
File
Micro butane torch
Board for soldering
Silver solder paste
Tweezers
Third-hand tool
Grinding and Engraving Tool (Accessories: Rubber polishing disc)
Sandpaper or sanding sponge
Polishing pads
Liver of sulfur
16-gauge sterling silver wire (925) – 50 cm
18-gauge sterling silver wire (925) - 20 cm
28-gauge fine silver wire (999) - 1 m
sterling silver “crown” strip width 4 mm – 3 cm
garnet round cabochon about 6x6x4 mm

After the payment, you will receive a link to download a pdf file and the sketch.
IMPORTANT! Before you purchase this lesson, think - you really need it? Because I will not refund the payment for pdf file if you change your mind.

All rights of this material reserved. Any distribution or publication without the prior permission of the author is forbidden. You are allowed to make the jewelry, following this lesson, and sell it, but you must mention the author of the idea in its description: Oksana Trukhan (UrsulaJewelry).